Heat Pump Outdoor Unit
SKU
TH16B6021S
Login to add this product on shopping list.
5 Ton - 60,000 BTU/Hour, 208/230 VAC 60 Hz 1-Phase, 34.7 A MCA, 16 SEER, 4100 CFM, R-410A, Rotary Compressor, Split System, Modulating, Heat Pump Outdoor Unit
Related Products
-
Air Handler Thermal Expansion Valve Kit Product #: 1TVMBG1 R-410A, Thermal Expansion Valve Kit with Internal Check Valve/Bolt-On Thermal Expansion Valve/2.5' Thermal Insulation/Bulb Strap/Bulb Clamp/Non-Stick Washer/Instruction for AP/AE/AVC Air Handler - Flexible Conduit Whip Product #: 344W 3/4" x 4', 8 AWG THHN, Metal Ends, Straight, 90D, Liquid Tight, Flexible Conduit Whip
- Flexible Conduit Whip Product #: 346W 3/4" x 6', 8 AWG THHN, Metal Ends, Straight, 90D, Liquid Tight, Flexible Conduit Whip
- Equipment Pad Product #: 36362B 36" x 36" x 2", 389 Lb Load, Black, Injection Molded Plastic, Rugged, Equipment Pad
- EZ-Pull® Line Set Product #: 3811850BI 50' Long, 3/8" Liquid, 1-1/8" Suction, 1/2" Thick EZ-PULL® Insulation, Straight/Plain Ends
- Adjustable Equipment Riser Product #: 4007 Adjustable Height: 6" - 7-1/4", Concrete Gray Screw-Up
- Air Conditioner Disconnect Switch Product #: DISC 240 VAC 1-Phase, 60 A, NEMA 3R, Steel, Non-Fusible, Top Open, Air Conditioner Disconnect Switch
- Reducer Fitting Product #: W01337 1" x 3/4", FTG x C, 700 PSI, Lead-Free, Wrot UNS C12200 Copper Alloy, Reducer
- Heat Pump Pad Product #: HP3636-8 36" x 36" x 8", Concrete Gray, Injection Molded Polypropylene, Heat Pump Pad
Product Description
| Improved Temperature Control - The inverter driven compressor and modulating system will automatically adjust capacity, in heat or cool mode, to precisely match the comfort demands of the space providing closer temperature and humidity control • Durable Finish - The automotive grade champagne colored powder painted and the specially coated wire grill and fasteners add to the corrosion resistant nature of the product allowing it to retain its aesthetics appeal throughout its life • Rugged Coil Protection - Coils are protected from mechanical damage by a stamped steel extruded louver coil guard design • Quality Coils - Enhanced aluminum fins are mechanically bonded to copper tubing • Protected Compressor - Compressors are protected by the system high and low pressure switches • The liquid line filter- drier is factory installed to protect the system against moisture and contaminates • Reliable Operation - Ball bearing fan motors provide superior performance in extreme temperatures. Factory installed accumulator protects the compressor while operating across a wide range of conditions • Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero ozone depletion • Top Discharge - Warm air is blown up, away from the structure and any landscaping and allows compact location on multi-unit applications • Low Operating Sound Levels - The sturdy cabinet and top design provides sound performance as low as 76 dBA • Better Service Access - Diagonal base valves with open access for Schrader removal tools and low-loss fittings and single panel access to the electrical controls • AHRI Certified • Made in USA"" | • Heat Pump Outdoor Unit • Type Split System, Modulating • Voltage Rating 208/230 Volt AC • Current Rating 34.7 Amp (MCA), 60 Amp (Maximum Overcurrent Device), 27.42 Amp Rated Load/64.5 Amp Locked Rotor (Compressor), 1.3 Amp Rated Load (Fan Motor) • Frequency Rating 60 Hertz • Number of Phases 1 • Power Rating 1/3 HP (Fan Motor) • Cooling Capacity 5 Ton • Temperature Control Type Thermostat • Operating Temperature 35 to 115 Deg F (Cooling), -20 to 75 Deg F (Heating) • Installation Vertical Wall Mount • Enclosure Material G90 Galvanized Steel • Enclosure Finish Powder Coat Painted • Size 35-1/4 Inch Width x 31-3/4 Inch Depth x 39-1/2 Inch Height • Weight 239 Pound • Approval UL 1995, CSA (Canada and US), CSA C22.2 • Compressor Type Rotary • Refrigerant Type R-410A • Coil Type Aluminum Fin and Copper Tube • Energy Efficiency Ratio 16 SEER • Air Flow Rating 4100 CFM • Line Set Size 3/8 Inch (Liquid), 7/8 Inch (Vapor) • Application Residential • Applicable Standard ANSI/AHRI 210/240/270, ISO 9001 | • Compressor Type Rotary • Refrigerant Type R-410A • Coil Type Aluminum Fin and Copper Tube • Energy Efficiency Ratio 16 SEER • Air Flow Rating 4100 CFM • Line Set Size 3/8 Inch (Liquid), 7/8 Inch (Vapor) • Application Residential • Applicable Standard ANSI/AHRI 210/240/270, ISO 9001 | • Delivering heating and cooling equipment you can trust requires an uncompromising approach to quality. Through innovative processes and rigorous testing, each Luxaire unit is built to provide consistently dependable comfort. The TH16 16 SEER Modulating Heat Pumps are the newest offering in our successful LX Family of split system heat pumps. These units use a state of the art inverter driven compressor to precisely meet customers comfort requirements. Using a conventional two-stage heat pump thermostat, the system will automatically modulate capacity and airflow from 50% to 100% of nominal capacity in 10% increments to meet the comfort requirements of the consumer, maximizing comfort while minimizing energy bills. Designed to work with Luxaire variable speed or standard ECM indoor air handling equipment it pro- vides consumers and dealers system installation options. Should the unit ever require service the main control and inverter control both provide system self-diagnostics. |
Specifications
| Cooling Capacity | 60000 BTU/Hour |
|---|---|
| Heat Pump Stages | Variable |
| Individual Item Weight | 239.000 Pound |
| Manufacturer | Johnson Controls (Luxaire Heating & Air Conditioning) |
| Manufacturer Part Number | TH16B6021S |
| Number Of Phases | 1 |
| SEER Rating | 16 SEER |
| Series/Model | TH16, LX |
| UNSPSC | 40101806 |
| Voltage Rating | 208/230 Volt AC |