9" x 9", 115 VAC, 60 Hz, 1.7 A, 138 W, 3000 RPM, Thermal Protected, Power Venter for Gas/Oil Furnace Appliance
Product Description
More Information
100% Negative Pressure in the Vent Pipe for Maximum Safety
• Standard Galvanized Pipe Can be Used Instead of Expensive Stainless Steel
• No Need to Seal Vent Pipe Joints, Saving Time and Money
• Significantly Longer Vent Lengths than Positive Pressure, Direct Vent Systems
• The SWG or Combovent is Recommended by Major Heating Appliance Manufacturers
• Easier to Install
• Easier to Service
• A Total System for Combustion Air and Venting""
• Gas/Oil Furnace Appliance Power Venter • Type Power Venter, Thermal Protected • Used On Gas/Oil Furnace Appliance • Overall Dimension 9 Inch Width x 9 Inch Height • Voltage Rating 115 Volt AC 60 Hertz • Current Rating 1.7 Amp • Power Rating 138 Watt • Speed Rating 3000 RPM • Approval ETL (Canada and US), UL
• Overall Dimension 9 Inch Width x 9 Inch Height • Voltage Rating 115 Volt AC 60 Hertz • Current Rating 1.7 Amp • Power Rating 138 Watt • Speed Rating 3000 RPM • Approval ETL (Canada and US), UL
• The SWG combines the motor, blower, and vent hood in one complete, easy to install unit. The SWG mounts on the outside of the building and pulls the combustion gases from the appliance through the outside wall utilizing 100% negative pressure. The SWG must be sized to match the appliance or appliances’ input firing rate. Most firing rates are published in the manufacturer’s installation manual. The SWG and ComboVent must be installed with a CK Control Kit to ensure proper listing and safe, efficient venting.