Heat Pump
SKU
RHP14L36B21S
Login to add this product on shopping list.
3 Ton - 36,000 BTU/Hour, 208/230 VAC 60 Hz 1-Phase, 21.99 A, 14 SEER, R410A, 1-Stage, Louvered, Scroll Compressor, Heat Pump, 38" x 34-1/4" x 39-1/2",
Related Products
- Flexible Conduit Whip Product #: 124W 1/2" x 4', 10 AWG THHN, Metal Ends, Straight, 90D, Liquid Tight, Flexible Conduit Whip
- Flexible Conduit Whip Product #: 126W 1/2" x 6', 10 AWG THHN, Metal Ends, Straight, 90D, Liquid Tight, Flexible Conduit Whip
- Evaporator Coil Thermal Expansion Valve Kit Product #: 1TVMBA1 1.5-2.5 Ton R-410A TXV for Luxaire and Guardian Evaporator Coils and AP/AE/AVC Air Handlers
- EZ-Pull® Line Set Product #: 383425BI 25' Long, 3/8" Liquid, 3/4" Suction, 1/2" Thick EZ-PULL® Insulation, Straight/Plain Ends
- EZ-Pull® Line Set Product #: 383435BI 35' Long, 3/8" Liquid, 3/4" Suction, 1/2" Thick EZ-PULL® Insulation, Straight/Plain Ends
- Equipment Pad Product #: 38422B 38" x 42" x 2", 479 Lb Load, Black, Injection Molded Plastic, Rugged, Equipment Pad
- Adjustable Equipment Riser Product #: 4007 Adjustable Height: 6" - 7-1/4", Concrete Gray Screw-Up
- Heat Pump Indoor Evaporator Coil Product #: CF48DXA1 24-1/2" x 20-1/2" x 27", 4 Ton, 1600 CFM, Prime Coated, Aluminum Coil/Heavy Gauge Galvanized Steel Cabinet, Full Cased, Upflow/Downflow, Indoor Evaporator Coil for Split System Cooling and Heat Pump
- Air Conditioner Disconnect Switch Product #: DISC 240 VAC 1-Phase, 60 A, NEMA 3R, Steel, Non-Fusible, Top Open, Air Conditioner Disconnect Switch
- Evaporator Coil Product #: XAFB36DXXN1 Upflow/Downflow, 3 Ton, 1200 CFM, 17-1/2" x 20-1/2" x 25-5/8", Cased Indoor Evaporator Coil for Split-System Cooling and Heat Pump
- Evaporator Coil Product #: XAFC36DXXN1 Upflow/Downflow, 3 Ton, 1200 CFM, 21" x 20-1/2" x 23", Cased Indoor Evaporator Coil for Split-System Cooling and Heat Pump
- Air Handler Product #: G248ADX 24-1/2" x 20-1/2" x 55-1/2", 48000 BTU/Hr, 208/230 VAC 60 Hz 1-Phase, 6.8 A, 1600 CFM, R410A, Direct Drive/Standard Electronically Commutated Motor, 1-Piece, Multi-Position, Fan Coil, Air Handler
Product Description
Easier Installation - Independent panels provide quick access for unit setup • Installation time is reduced by easy power and control wiring access • The factory installed filter-drier and factory charge for a 15-Foot lineset means less time spent brazing and charging the system • The small base dimension and reduced unit size make for easier retrofits • Durable Finish - The coated steel wire fan guard, coated external fasteners and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep • Powdercoat paint further protects external panels • Louvered Coil Protection - Two stamped steel louvered panels protect the coil from mechanical damage • Quality Coils - Enhanced aluminum fins are mechanically bonded to copper tubing • Protected Compressor - Compressors are protected internally by a high pressure relief valve and a temperature sensor and externally by the system high and low pressure switches • The liquid line stainless steel filter-drier is factory installed to protect the compressor against moisture and debris • Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero ozone depletion • Top Discharge - Air is blown up, away from the structure and any landscaping and allows compact location on multi- unit applications"" | • Heat Pump • Type 1-Stage, Louvered, Scroll Compressor • Voltage Rating 208/230 Volt AC • Current Rating 21.99 Amp (Minimum Circuit Ampacity), 15.35 Amp Rated Load/83.9 Amp Locked Rotor (Compressor), 2.8 Amp Rated Load (Fan Motor) • Frequency Rating 60 Hertz • Number of Phases 1 • Power Rating 1/3 HP (Fan Motor) • Cooling Capacity 36000 BTU/Hour • Temperature Control Type Thermostat • Connection Type Terminal Block • Operating Temperature 55 to 125 Deg F (Cooling), -20 to 75 Deg F (Heating) • Installation Wall, Roof • Enclosure Material G90 Galvanized Steel • Enclosure Finish Powder Coated • Size 38 Inch Width x 34-1/4 Inch Depth x 39-1/2 Inch Height • Weight 215 Pound • Approval CSA (Canada and US), CSA 22.2, UL • 1st Generation • Energy Efficiency Ratio 14 SEER • Refrigerant Type R410A • Motor Speed Rating 834 RPM • Liquid Line Size 3/8 Inch • Vapor Line Size 7/8 Inch • Applicable Standard ANSI/AHRI, ISO 9001 | • 1st Generation • Energy Efficiency Ratio 14 SEER • Refrigerant Type R410A • Motor Speed Rating 834 RPM • Liquid Line Size 3/8 Inch • Vapor Line Size 7/8 Inch • Applicable Standard ANSI/AHRI, ISO 9001 | • Guardian® home comfort systems are designed and built to provide maximum quality, comfort and efficiency for your home. Guardian® manufacturing meets world-class standards to ensure the highest quality product for your home. |
Specifications
Cooling Capacity | 36000 BTU/Hour |
---|---|
Heat Pump Stages | 1 |
Individual Item Weight | 215.000 Pound |
Manufacturer | Johnson Controls (Guardian Home Comfort Systems) |
Manufacturer Part Number | RHP14L36B21S |
Number Of Phases | 1 |
SEER Rating | 14 SEER |
Series/Model | RHP |
UNSPSC | 40101806 |
Voltage Rating | 208/230 Volt AC |