82% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
• A power exhaust can rotate 180 Deg allowing the unit to be vented vertically or horizontally
• A 100% shut-off if the unit does not light, to ensure that unburned gases do not build up in the unit
• An intermittent pilot-ignition system with continuous retry to keep the unit from locking and needing to be rest if the unit does not light on the first try
• All PDP units to be field-converted from natural gas to propane if desired
• A safety pressure-switch monitors the vent pipe to assure flue gases leave the building and do not back up in the space
• Designed to utilize the smallest-diameter vent pipe possible
• “Wing” screws so that the bottom pan can be dropped without a screwdriver or nut driver
• A level hanging mechanism for easy field adjustments after adding accessories that may change the unit’s center of gravity
• Made in USA""
• Gas Fired Unit Heater • Type Power Vented Propeller, Low-Profile, 1-Stage • Voltage Rating 115 Volt AC 60 Hertz • Power Rating 3/4 HP • Number of Phases 1 • Capacity 350000 BTU/Hour (Input), 280000 BTU/Hour (Output) • Heating Element Aluminized Steel • Control Type 115 to 24 Volt Step Down Control Transformer • Fan/Motor Type 1075 RPM Permanent Split Capacitor • Air Flow Rate 4870 CFM • Material Aluminized Steel • Size 33-5/8 Inch Width x 34-11/16 Inch Depth x 40-1/4 Inch Height • Application Residential, Commercial, Industrial • Approval ETL (Canada and US), CSA, ANSI Z223.1 • Ignition Type Intermittent Pilot • Gas Type Natural • Air Temperature Rise 53 Deg F • Mounting Height 20 Foot • Heat Throw 70 Foot at Maximum Mounting Height • Ambient Temperature 65 Deg F • Gas Connection Size 3/4 Inch • Fan Diameter 22 Inch
• Ignition Type Intermittent Pilot • Gas Type Natural • Air Temperature Rise 53 Deg F • Mounting Height 20 Foot • Heat Throw 70 Foot at Maximum Mounting Height • Ambient Temperature 65 Deg F • Gas Connection Size 3/4 Inch • Fan Diameter 22 Inch
• Modine’s PDP power vented unit heaters are inexpensive to install, easy to use, and offer excellent in-service economy.
