83% Thermal Efficiency, Maximizing Seasonal Efficiency Through the Use of a Collector Box and the Power Exhauster
• A Power Exhaust can Rotate 180 Degree Allowing the Unit to be Vented Vertically or Horizontally
• A 100% Shut-Off
• An Intermittent Pilot-Ignition System with Continuous Retry to Keep the Unit from Locking and Needing to be Rest if the Unit Does Not Light on the First Try
• All PDP/BDP Units to be Field-Converted from Natural Gas to Propane if Desired
• A Safety Pressure-Switch Monitors the Vent Pipe to Assure Flue Gases Leave the Building and Do Not Back up in the Space
• Designed to Utilize the Smallest-Diameter Vent Pipe Possible
• BDP Models are Designed to Operate Against 0.5 Inches of External Static Pressure
• "Wing" Screws so that the Bottom Pan can be Dropped without a Screwdriver or Nut Driver
• A Level Hanging Mechanism for Easy Field Adjustments after Adding Accessories that May Change the Unit's Center of Gravity
• Made in USA""
• Gas-Fired Unit Heater • Type Vertical Power-Vented, Propeller Unit • Voltage Rating 115 Volt AC 60 Hertz • Current Rating 5.15 Amp • Number of Phases 1 • Capacity 200000 BTU/Hour (Input), 164000 BTU/Hour (Output) • Heating Element Aluminized Steel Heat Exchanger • Control Type 24 Volt Step Down Control Transformer • Fan/Motor Type 1/6 HP 1075 RPM 2.8 Amp at 115 Volt Permanent Split Capacitor Motor • Air Flow Rate 2870 CFM at 70 Deg F • Material 20 Gauge Aluminized Steel • Finish Baked Polyester Powder Painted • Color Gray-Green • Size 25-5/8 Inch Width x 34-3/4 Inch Depth x 40-1/4 Inch Height • Application Industrial, Commercial • Approval CSA B149.1, ETL (Canada and US), CEC • Fuel Type Natural • Ignition Type Intermittent Pilot • Thermal Efficiency 83 Percent • Gas Connection 1/2 Inch • Fan Diameter 20 Inch • Applicable Standard ANSI Z223.1 (NFPA 54), ANSI/NFPA 88A/B
• Fuel Type Natural • Ignition Type Intermittent Pilot • Thermal Efficiency 83 Percent • Gas Connection 1/2 Inch • Fan Diameter 20 Inch • Applicable Standard ANSI Z223.1 (NFPA 54), ANSI/NFPA 88A/B
• The perfect way to efficiently heat an ample space such as a large pole barn or a commercial or industrial warehouse. Easy to use and time tested for quality and durability. The PDP model series expands on the size range of the Hot Dawg Series. Our commercial-grade power vent unit heaters come with either a propeller fan or centrifugal blower fan in seven different sizes.
