3/4" x 3/4" x 3/4", Slip x Slip x Slip, Copper Braze, Swaged, Straight, Access Valve Tee
Product Description
More Information
Our Swaged Copper Braze Tees Allow for Simple Installation Anywhere Along the Line
• Braze Cups on Both Ends
• JB Machines All of the Access Valves at the Factory in Aurora, Illinois Using the Highest Level of Brass Consisting of 65% Copper and 35% Zinc
• This Gives Our Brass Fittings and Access Valves High Tensile Strength While Resisting Corrosion
• Many Import Fittings Use Lower Quality Brass with Lower Copper Content, Resulting in Higher Failure Rates
• JB Machines All of Our Valves to the Strict Guidelines of the ARI to Ensure Proper Sealing of the Valve and Core Surfaces
• Our Access Fittings have Generous Counter Bores to Allow for the Removal of the Core if the Flare Becomes Damaged
• All Tees and Crosses are Tapped to Receive an Access Core in All 1/4 Inch SAE Flare Ends
• All Pipe Connections have Internal Braze Cups for Dip Tube Applications
• Valve Core is Stainless Steel and Brass for Use with All Refrigerants Including R-410A
• Valve Core is Stainless Steel and Brass for Use with All Refrigerants Including R-410A
• Resistant to Oil, Alkalites and Diluted Mineral Acid
• Made in USA""
• Refrigerant Access Valve Tee Fitting • Type Straight, Swaged • Nominal Size 3/4 Inch x 3/4 Inch x 3/4 Inch • End Connection Slip x Slip x Slip • Material Copper Braze • Temperature Rating -40 to 250 Deg F • Overall Length 3 Inch