Cold temperatures are here to stay learn how to protect your house from the cold

Winter weather is no fun in the Midwest area of the Unite States.  T.F. Ehrhart has been servicing this cold area since the early 1900’s and we know what needs to be done to protect your home in this cold weather.  First off have an efficient furnace, that has been checked in the Fall to make sure there are no cracks in the heat exchanger and there is a clean and appropriate size filter in place.  If you have a chimney make sure the liner is free from debris and the cap on your roof is in good shape.  After that here are a few more tips to make sure things stay as warm as possible.

  • Keep drapes and blinds closed, except when windows are in direct sunlight.
  • Put up storm windows, or install sheet plastic window insulation kits on the inside of windows.
  • Cover or remove any window air conditioners.
  • Insulate electrical outlets and switches on exterior walls with foam seals available at home centers.
  • Caulk any cracks or holes on the outside of your house.
  • Repair or replace weather stripping and thresholds around doors and windows.
  • Run paddle ceiling fans on low in reverse (clockwise when looking up) to circulate warm air.
  • Put draft snakes on window sills, between window frames, and against doors.

For those of you with vehicles that are parked outside and not in a garage we have listed below a few other items that may come in handy.  These can also apply to homeowners with a garage or shop building that is not heated also.

  • Check antifreeze levels in cars. Add if needed, then run the engine to circulate the new antifreeze through the radiator and engine block.
  • Add freeze resistant windshield wiper fluid, and spay to circulate it in lines.
  • Check air pressure in tires, since cold weather causes the pressure to lower.

Stay safe and warm Spring is only 29 days away!


Planning Ahead To Get Your Business Ahead

We have all heard that we need to plan ahead and we know this but how many times do we actually do this?  After all, planning takes time when we could be doing jobs right now that are making us money.  This logic isn’t wrong but it is slightly flawed, what is that time you spent planning made your next jobs more efficient and saved you time, and that saved you money?  The article below by Butch Welsch entitled, “My Two Cents: Failing to Plan is Planning to Fail”.  This    is a great article for Contractors to read about how to improve their process from first interactions with the customer until the job is installed and billed.  Check it out!

My Two Cent: Failing to Plan is Planning to  Fail

Headshot-welschBy: Butch Welsch

The saying, “Failing to plan is planning to fail,” is attributed to Ben Franklin. While I wasn’t around to hear him say it, it’s a statement that certainly applies to HVAC contractors. In the past, I’ve talked about the need for long-range planning, and that need is still there. Today, however, I want to talk about planning for that next replacement job. It is important from the contractor’s profitability standpoint, as well as the customer’s satisfaction, that the job is planned out carefully in advance. As a contractor, you need to have systems in place to ensure the proper planning is done for every job.

Once the sale has been agreed upon, our next step is to arrange an installation date in order to have the job on our installation board. The salesman and replacement foreman determine the skill set needed for the job and assign the job to one of the lead installers with those skills.

Next, a job ticket is generated that details all the pieces of equipment, zoning items, controls, etc. that will be required. The job ticket also includes the planned installation date and installer. Naturally, things occur that may change the install date and/or installer, but establishing those in the beginning provides a good starting point.

As soon as possible, one copy of the job ticket is given to our person responsible for purchasing. That person then verifies which items are in stock and which need to be ordered to make sure we are prepared on the install date. It is important that all of the details the salesperson has agreed to with the customer are shown on the job ticket. Put it in writing. Don’t count on someone remembering that he said this or that.

At this time, if the purchaser encounters a problem, he or she needs to get with the salesman so that everyone is aware of the issue and any alternative necessary arrangements can be made.

If there are any significant duct-work modifications, such as the moving of supplies, returns, or similar installation functions, we’ve found it cost-effective to have a foreman stop by the home to obtain all of the necessary measurements. Although our install trucks have the capability of making some fittings, we have found that, to provide the finest in quality and efficiency, having the fittings and parts made in the shop is the best method. When the foreman returns to the shop, he prepares the detailed shop drawings as well as the complete list of all material items that will be needed on the job. This includes gas line materials, electrical items, polyvinyl chloride (PVC) pipe, fittings, etc.

Since the install date is clearly on the job ticket, the shop foreman knows when to have the materials fabricated for the job.

The day before the installation, all of the items we will be sending to the job are collected together in a location assigned to the installer who is scheduled for the job. Those locations obviously need to be as close as possible to the warehouse doors.

It is extremely important that the materials for each job are clearly separated from the other jobs. In the rush and hectic pace that typically occurs in a contractor’s shop in the morning, clearly marked and separated items are crucial to timely operation.

Depending upon several factors, such as job location, type of job, etc., we will have either the lead installer or the helper go directly to the job while the other comes to the shop to unload yesterday’s trash and load the items that are in his assigned location for today’s job.

If there are any special instructions, in addition to them being shown on the job ticket, our replacement foreman will explain those instructions to the installer at that time. This step is extremely important. Customers expect their particular requirements to be performed just as they outlined them with the sales engineer. Making sure communication is excellent between the sales staff, the replacement foreman, and the installers is probably the most important factor in proper planning.

In our business, things change at a moment’s notice. As a result, I can’t guarantee that planning like this will cure all the problems that might occur on an installation, but I can assure you that by taking these steps you will greatly reduce a number of avoidable errors.




Visit Us On FacebookVisit Us On TwitterVisit Us On Linkedin